Back to overview

JB-750

750 V, flexible, colour coded, meter marking

Technical data

Special-PVC control cable adapted
to DIN VDE 0285-525-2-11 /
DIN EN 50525-2-11 and IEC 60227-5
Temperature range
flexing -15°C to +80°C
fixed installation -40°C to +80°C
Nominal voltage
U₀/U 450/750 V
fixed installation, under protection
U₀/U 600/1000 V
Test voltage
4000 V
Breakdown voltage
min. 8000 V
Minimum bending radius
flexing 7,5x outer Ø
fixed installation 4x outer Ø

Cable structure

Bare copper conductor,
fine wire acc. to
DIN VDE 0295 cl.5 / IEC 60228 cl.5
Core insulation of special PVC
compound type TI2 to
DIN VDE 0207-363-3 / DIN EN 50363-3
Core identification to JB/OB colour code
GN-YE conductor, 3 cores and above
in the outer layer
Cores stranded in layers with
optimal lay length
Outer sheath of special PVC
compound type TM2 to
DIN VDE 0207-363-4-1/DIN EN 50363-4-1
Sheath colour: grey (RAL 7001)
With meter marking

Properties

Extensively oil resistant,
oil-/chemical resistance
see "Technical Information"
The materials used during manufacturing
are cadmium-free, contain no silicone
and are free from substances harmful
to the wetting properties of lacquers

Tests

PVC self-extinguishing and flame retardant
acc. to DIN VDE 0482-332-1-2 /
DIN EN 60332-1-2 / IEC 60332-1-2

Note

G = with GN-YE conductor
x = without GN-YE conductor (OB).
Cleanroom qualification tested with analog
type. Please note "cleanroom qualified"
when ordering.
The conductor is metrically constructed
(mm²). The AWG designation is
approximate and purely informative.
Screened analogue type:
Y-CY-JB

Application

These cables are used for flexible use for medium mechanical stresses with free movement without tensile stress or forced movements in dry, moist and wet rooms but not suitable for open air, as measuring and control cables in tool machinery, conveyor belts, production lines, as well as in machinery production, in air-conditioning and steel production plants. The earth core is located immediately below the outer sheath. JB cables are suitable for use in all electrical equipment either in dry or damp areas. They should not, however, be installed in the open air.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet
Certificate of compliance

Part No.	No.cores x cross-sec. mm²	Outer ø app. mm	Cop. weight kg / km	Weight app. kg / km	AWG-No.
11161	2 x 2,5	9,1	48,0	130,0	14
11162	3 G 2,5	9,9	72,0	164,0	14
11163	3 x 2,5	9,9	72,0	164,0	14
11164	4 G 2,5	11,0	96,0	200,0	14
11165	4 x 2,5	11,0	96,0	200,0	14
11166	5 G 2,5	12,0	120,0	247,0	14
11167	5 x 2,5	12,0	120,0	247,0	14
11168	6 G 2,5	13,3	144,0	301,0	14
11169	7 G 2,5	14,6	168,0	321,0	14
11121	2 x 4	10,4	76,8	195,0	12
11144	3 G 4	11,2	115,0	235,0	12
11122	4 G 4	12,5	154,0	295,0	12
11123	5 G 4	13,9	192,0	361,0	12
11124	7 G 4	16,8	269,0	498,0	12
11125	11 G 4	22,3	422,0	767,0	12
11126	3 G 6	12,6	173,0	355,0	10
11127	4 G 6	14,0	230,0	424,0	10
11128	5 G 6	15,5	288,0	525,0	10
11129	7 G 6	19,0	403,0	625,0	10
11153	3 G 10	16,0	290,0	611,0	8
11130	4 G 10	18,0	384,0	701,0	8
11131	5 G 10	20,0	480,0	858,0	8
11132	7 G 10	23,1	672,0	1106,0	8
11154	3 G 16	18,5	461,0	912,0	6
11133	4 G 16	20,8	614,0	1035,0	6
11134	5 G 16	23,0	768,0	1259,0	6
11135	7 G 16	31,0	1075,0	1780,0	6
11155	3 G 25	23,3	720,0	1388,0	4
11136	4 G 25	26,0	960,0	1581,0	4
11137	5 G 25	29,0	1200,0	1997,0	4
11156	3 G 35	26,6	1008,0	1767,0	2
11138	4 G 35	29,7	1344,0	2105,0	2
11139	5 G 35	33,1	1680,0	2636,0	2
11157	3 G 50	30,2	1440,0	2556,0	1
11140	4 G 50	33,9	1920,0	2940,0	1
11145	5 G 50	37,6	2400,0	3936,0	1
11158	3 G 70	37,1	2016,0	3182,0	2/0
11141	4 G 70	41,6	2688,0	4090,0	2/0
11146	5 G 70	46,3	3360,0	5443,0	2/0
11159	3 G 95	40,1	2736,0	4676,0	3/0
11142	4 G 95	44,8	3648,0	5540,0	3/0
11147	5 G 95	50,2	4560,0	6931,0	3/0
11160	3 G 120	45,5	3456,0	5630,0	4/0
11143	4 G 120	50,8	4608,0	7000,0	4/0
11148	4 G 150	57,0	5760,0	8340,0	300 kcmil
11149	4 G 185	65,8	7104,0	9904,0	350 kcmil