Back to overview

JE-LiHCH

Bd industry electronic cable, halogen-free

Technical data

Industry electronic cable adapted to
DIN VDE 0815
Conductor resistance at 20°C
39,2 Ohm/km
Temperature range
flexing -5°C to +50°C
fixed installation -30°C to +70°C
Operating peak voltage 225 V
(not for heavy current installation purposes)
Test voltage
core/core 500 V
core/screen 2000 V
Insulation resistance
min. 100 MOhm x km
Mutual capacitance at 800 Hz
max. 120 pF/m
(this value may be exceeded by
20% with a make-up to 4 pairs)
Capacity unbalance at 800 Hz
max. 200 pF/100 m
(20% of the values, but one
value up to 400 pF is allowed)
Minimum bending radius
7,5x cabel Ø
Radiation resistance
up to 100x10⁶ cJ/kg (up to 100 Mrad)
Caloric load values
see "Technical Information"

Cable structure

Bare copper, 7x0,3 mm
Core insulation of polymer
compound type HI1 or HI2
to DIN VDE 0207-23
Insulation wall thickness 0,3 mm
Core identification to DIN VDE 0815
(with ring colours and ring groups)
2 cores twisted in pair, 4 pairs to a unit
and several units stranded in layers (for
2 pairs cable, 4 cores stranded to a quad)
Foil wrapping
Copper braided screening, wire 0.2 mm,
approx. 85% coverage
Outer sheath halogen-free
compound type HM1 or HM2 to
DIN VDE 0207-24
Sheath colour: grey RAL (7032)

Properties

Not for purposes of high current
and power installation as well as
underground laying

Tests

Flame test acc. to
DIN VDE 0482-332-3 / BS 4066-3 /
DIN EN 60332-3 / IEC 60332-3
Corrosiveness of combustion gases
acc. to DIN VDE 0482-267 /
DIN EN 50267-2-2 / IEC 60754-2
Smoke density acc. to
DIN VDE 0482-1034-1+2 / BS 7622-1+2
DIN EN 61034-1+2 / IEC 61034-1+2

Note

2-paired cables:
cores stranded to a star quad
AWG sizes are approximate equivalent
values. The actual cross section is in mm².
LS0H = Low Smoke Zero Halogen

Application

Halogen-free installation cables with improved characteristics in the case of fire are used for telephone transmission, measuring and signal purposes. The copper screened design (C) protects the transmission circuits against electrical interferences. A fire propagation is prevented through high oxygen index of the insulation material and produce no corrosive gases in case of fire. They are preferably used for telecommunication installations inside buildings. These cables are suitable for fixed installation in areas with danger of fire, in dry and damp environments as well as in and under plaster.
EMC = Electromagnetic compatibility
To optimize the EMC features we recommend a large round contact of the copper braiding on both ends.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet
Certificate of compliance

Part no.	No.pairs x cross-sec. mm²	Core Ø approx. mm	No. units	Outer Ø approx. mm	Cop. weight kg / km	Weight approx. kg / km	AWG-No.
34350	2 x 2 x 0,5	1,6	-	6,8	44,0	102,0	20
34351	4 x 2 x 0,5	1,6	1	9,1	80,0	168,0	20
34352	8 x 2 x 0,5	1,6	2	11,4	152,0	297,0	20
34353	12 x 2 x 0,5	1,6	3	13,3	192,0	357,0	20
34354	20 x 2 x 0,5	1,6	5	16,4	288,0	555,0	20
34355	32 x 2 x 0,5	1,6	8	19,6	439,0	852,0	20
34356	40 x 2 x 0,5	1,6	10	21,7	531,0	1005,0	20