Back to overview

NYM-J/-O PVC-Sheathed Cable

VDE approved

Technical data

PVC-sheathed cable to
DIN VDE 0250-204
Temperature range
flexing +5°C to +70°C
fixed installation -40°C to +70°C
Nominal voltage
U₀/U 300/500 V
Test voltage
2000 V
Minimum bending radius
fixed installation 4x cable Ø
Radiation resistance
up to 80x10⁶ cJ/kg (up to 80 Mrad)
Caloric load values
see "Technical Informations"

Cable structure

Bare copper conductor,
single-wire or multi-wire,
to DIN VDE 0295 cl.1 or cl.2,
BS 6360 cl.1 or cl.2 and
IEC 60228 cl.1 or cl.2
Core insulation of PVC
compound type TI1 to
DIN VDE 0207-363-3 / DIN EN 50363-3
Core identification to
DIN VDE 0293-308
Cores stranded in layers with
optimal lay length
Filler
Outer sheath of PVC
compound type TM1 to
DIN VDE 0207-363-4-1/DIN EN 50363-4-1
Sheath colour: grey (RAL 7035)

Properties

Tests

PVC self-extinguishing and flame retardant
acc. to DIN VDE 0482-332-1-2 /
DIN EN 60332-1-2 / IEC 60332-1-2

Note

re = round conductor, single-wire
rm = round conductor, multi-wire
G = with GN-YE conductor
x = without GN-YE conductor
AWG sizes are approximate equivalent
values. The actual cross section is in mm².

Application

For industrial- and wiring purposes. Usable in the open, in dry, damp and wet environments in the open and concealed, as well as in masonry and in beton, not suitable for imbedding in solidified- or compressed-concrete. Outdoor usage is only possible, as long as the cable is protected against direct sunlight.
CE = Product conforms with Low-Voltage Directive 2014/35/EU.

Downloads

Data sheet
Certificate of compliance

Part no.	No.cores x cross-sec. mm²		Outer Ø approx. mm	Cop. weight kg / km	Weight approx. kg / km	AWG-No.
39050	1 G 1,5	re	5,4	14,4	40,0	16
39001	1 x 1,5	re	5,4	14,4	40,0	16
39006	2 x 1,5	re	8,7	29,0	170,0	16
39056	3 G 1,5	re	9,1	43,0	135,0	16
39007	3 x 1,5	re	9,1	43,0	135,0	16
39058	4 G 1,5	re	9,8	58,0	160,0	16
39009	4 x 1,5	re	9,8	58,0	160,0	16
39066	5 G 1,5	re	10,3	72,0	190,0	16
39017	5 x 1,5	re	10,3	72,0	190,0	16
39072	7 G 1,5	re	11,5	101,0	235,0	16
39023	7 x 1,5	re	11,5	101,0	235,0	16
39076	10 G 1,5	re	13,8	144,0	330,0	16
39077	12 G 1,5	re	14,4	173,0	405,0	16
39055	1 G 2,5	re	6,0	24,0	70,0	14
39024	1 x 2,5	re	6,0	24,0	70,0	14
39057	3 G 2,5	re	10,4	72,0	190,0	14
39008	3 x 2,5	re	10,4	72,0	190,0	14
39059	4 G 2,5	re	11,3	96,0	230,0	14
39010	4 x 2,5	re	11,3	96,0	230,0	14
39067	5 G 2,5	re	12,0	120,0	270,0	14
39018	5 x 2,5	re	12,0	120,0	270,0	14
39075	7 G 2,5	re	13,2	168,0	342,0	14
39051	1 G 4	re	6,6	38,0	80,0	12
39002	1 x 4	re	6,6	38,0	80,0	12
39074	3 G 4	re	12,0	115,0	258,0	12
39060	4 G 4	re	13,0	154,0	330,0	12
39011	4 x 4	re	13,0	154,0	330,0	12
39068	5 G 4	re	14,5	192,0	410,0	12
39019	5 x 4	re	14,5	192,0	410,0	12
39052	1 G 6	re	7,2	58,0	105,0	10
39003	1 x 6	re	7,2	58,0	105,0	10
39078	3 G 6	re	13,0	173,0	320,0	10
39061	4 G 6	re	15,1	230,0	460,0	10
39012	4 x 6	re	15,1	230,0	460,0	10
39069	5 G 6	re	16,1	288,0	540,0	10
39020	5 x 6	re	16,1	288,0	540,0	10
39053	1 G 10	re	8,4	96,0	155,0	8
39004	1 x 10	re	8,4	96,0	155,0	8
39062	4 G 10	re	17,6	384,0	680,0	8
39013	4 x 10	re	17,6	384,0	680,0	8
39070	5 G 10	re	19,2	480,0	850,0	8
39021	5 x 10	re	19,2	480,0	850,0	8
39054	1 G 16	rm	9,9	154,0	230,0	6
39005	1 x 16	rm	9,9	154,0	230,0	6
39063	4 G 16	rm	21,3	614,0	1048,0	6
39014	4 x 16	rm	21,3	614,0	1048,0	6
39071	5 G 16	rm	23,4	768,0	1280,0	6
39022	5 x 16	rm	23,4	768,0	1280,0	6
39079	1 G 25	rm	12,0	240,0	325,0	4
39064	4 G 25	rm	25,8	960,0	1649,0	4
39015	4 x 25	rm	25,8	960,0	1649,0	4
39073	5 G 25	rm	28,7	1200,0	1970,0	4
39065	4 G 35	rm	28,5	1344,0	2000,0	2
39016	4 x 35	rm	28,5	1344,0	2000,0	2