TOPFLEX^®-EMV-UV-3 PLUS 2XSLCH-J

• Special motor power supply cable
  for frequency converters
  in reference to DIN VDE 0250
• Temperature range
  flexing  -15°C  to  +90°C
  fixed installation  -40°C  to  +90°C
• Permissible operating temperature
  at conductor  +90°C
• Nominal voltage
  U₀/U 600/1000 V
• Max. permissible operating voltage
  - 3-Phase and single phase
    operation  700/1200 V
  - DC operation  900/1800 V
• Test voltage
  4000 V
• Coupling resistance
  acc. to different cross sections
  max. 250 Ohm/km
• Minimum bending radius
  flexing for outer Ø:
  up to 12 mm: 10x outer Ø
  > 12-20 mm: 15x outer Ø
  > 20 mm: 20x outer Ø
  fixed installation for outer Ø:
  up to 12 mm: 5x outer Ø
  > 12-20 mm: 7,5x outer Ø
  > 20 mm: 10x outer Ø

• Bare copper conductor,
  fine wire acc. to
  DIN VDE 0295 cl.5 / IEC 60228 cl.5
• Core insulation of cross-linked
  polyethylene (XLPE)
• Core identification BK, BN, GY
• GN-YE conductor (divided into 3)
• 3+3 core design
• Cores stranded in concentric layers
• 1. Screen with special aluminium film
  2. Tinned copper braided screen,
      approx. 85% coverage
• Outer sheath special polyolefin compound
• Sheath colour: black (RAL 9005)
• With meter marking
   

Tests

• Flame test acc. to
  DIN VDE 0482-332-3-24 /
  DIN EN 60332-3-24 / IEC 60332-3-24
• Flame retardant acc. to
  DIN VDE 0482-332-1-2 /
  DIN EN 60332-1-2 / IEC 60332-1-2
• Corrosiveness of combustion gases
  acc. to DIN VDE 0482-754-2 /
  DIN EN 60754-2 / IEC 60754-2
• Smoke density acc. to
  DIN VDE 0482-1034-1+2 /
  DIN EN 61034-1+2 / IEC 61034-1+2
• UV-resistant acc. to DIN EN ISO 4892-2
• Meets EMC requirements acc. to
  EN 55011 and DIN VDE 0875-11

• Halogen-free
• Low mutual capacitance
• Low coupling resistance for high
  electromagnetic compatibility
• This screened motor supply cable with low
  mutual capacitance of the single cores be-
  cause of the special XLPE core insulation
  and low screen capacitance enable a low-
  loss transmission of the power
• Due to the optimal screening an
  interference-free operation of
  frequency converters is obtained
• The 3 PLUS-construction of motor power
  supply cables features a symmetrical
  3-core design, improved in terms of EMC
  characteristics comparing favorably with a
  4-core version. The protective conductor
  PE, divided into 3 is uniformly stranded in
  the interstices. This enables an extremely
  concentric structure.
• The minimum cross section of 0,75 mm²
  meets the requirements of DIN EN 60204-1
• The materials used during manufacturing
  are cadmium-free, contain no silicone
  and are free from substances harmful
  to the wetting properties of lacquers

• ^**) The current carrying capacity for
  permanent operation at ambient temperature
  of 30°C. For deviating ambient temperatures
  the conversion factors should be used and
  for further see the indication in
  DIN VDE 0298-4.
• The conductor is metrically constructed
  (mm²). The AWG designation is
  approximate and purely informative.